可在这些机器上使用
j k
other information
how to use:
1. attach desired pintuck foot to machine.
2. snap the round knob of the pintuck blade into the round hole on the stitch plate with the blade pointing towards the needle. insert a 1.6 mm - 2.0 mm twin needle into the machine.
3. draw or create lines on fabric where pintucks are desired. position the line at the center of the presser foot. stitch slightly slower than normal, guiding the fabric. the pintuck blade will raise the center of the fabric to produce defined pintucks. gently pull the fabric taut while sewing the pintucks.